Placeholder

The following is intended to provide the basic instructions for installation, operating and maintenance of the
Severe Duty Monitor.

MANUAL: 3491

SKU: 3491. Category: . Brands: .

The following is intended to provide the basic instructions for installation, operating and maintenance of the
Severe Duty Monitor:

Tools Required
* Utility knife
* Medium flat screwdriver
* Medium Phillips screwdriver
* Small flat screwdriver
* Small Phillips screwdriver o 1/2 inch hex head wrench
* Electrician’s pliers (multipurpose, stripping and crimping).

PRODUCT RATINGS
Maximum motor current draw:
12 volt versions 15.0 amps each for elevation and rotation motors
3.0 amps for nozzle pattern motor
24 volt versions 7.5 amps each for elevation and rotation motors
1.5 amps for nozzle pattern motor
Normal operating current (depending on operating conditions – pressure, flow, etc.):
12 volt versions 3 – 10 amps each for elevation and rotation motors
0.7 amps for nozzle pattern motor
24 volt versions 2 – 5 amps each for elevation and rotation motors
0.4 amps for nozzle pattern motor.

Minimum Voltage: (Truck engine must be operating for proper voltage requirement.)
All 12 volt motors: 11.5 volts while operating
All 24 volt motors: 23 volts while operating
Mass: 57 lbs. (26 kg)
Maximum Flow: 750 GPM (2840 lpm)
Maximum Pressure: 200 PSI (14 bar)
Noise Emission: 91 Db @1m with maximum flow